In-Mold Transfer Foil

In-Mold Transfer Foil

In-Mold Transfer Foil

MONATEC IMD LINEUP

Cure Method Type Pencil Hardness Elongation Features
After-cure 327 2H 80%

High Elongation,
Reduced Interference Fringes

318G 2H 40% Mirror Ink Applicable
328T 2H 60%

High Transparency
(TT: 92.15%  Haze: 0.37%)

MAT3 2H 20% Mat Type
MHL5 2H 20% Hairline Type (Mat)
Pre-cure 568 2H 20% Anti Stain Type
558 3H 0% Super Hard Type

MONATEC IMD Physical Properties

Item Evaluation Method Evaluation Remarks
SW (steel wool)
Resistance
1.96N/Rubbing(10 times) No Scratch(568△)
Cross Cut(cc) To peel off strongly at 30
degree by Scotch tape after cc
No Peeling
Heat Cycle

-30℃(2hr)~ +85℃(2hr)
10 cycles/40hrs

No change in appearance
Heat/Humidity
Resistance
+25℃(2hr)~+55℃(2hr)
95%wet/6cycle/144hrs
No change in appearance
Hand Cream(NIVEA)
& Artificial Sweat
75℃/95%wet/24hrs No change in appearance
*Above data are measured value;  not guaranteed.